Bison Adhesive Spray for Foil Panni 500ml (Leafing Glue)

 2,000

WHAT IS IT?
PROPERTIES
WHAT DOES IT DO?
SUITABLE FOR:

For bonding paper, cardboard, collages, metal foils, leather, felt, many plastics, textiles, Styrofoam? etc. with themselves and many other materials such as wood, ceramics, glass etc.

NOT SUITABLE FOR: Not suitable for PE, PP.

Compare
SKU: 1008250 Categories: ,
WHAT IS IT?
PROPERTIES
WHAT DOES IT DO?
SUITABLE FOR:

For bonding paper, cardboard, collages, metal foils, leather, felt, many plastics, textiles, Styrofoam??etc. with themselves and many other materials such as wood, ceramics, glass etc.

NOT SUITABLE FOR:

Not suitable for PE, PP.

GETTING STARTED

BEFORE USE:

Working conditions

Do not use at temperatures below +10 ?C.

Personal safety

Spray adhesive contains volatile, highly flammable solvents. Appropriate precautions should be taken when using and storing this product. When applying product to larger surfaces, ensure good ventilation in the working area.

Surface requirements

The areas to be glued must be dry and free of any dust or grease.

Coverage

5 m2/l, applied on both sides

DURING USE:
Directions for use

Shake can before use. Make sure the distance between the spray nozzle and the material to be coated is 20-25 cm. Spray on the adhesive fine and constantly. Glues: 1. permanent: Apply a thin, even coat to both surfaces. Wait for at least 10 min., then press the parts together firmly. Bonds immediately – correcting is no longer possible! The greater the pressure, the better the bonding result. The duration of the pressure is not essential for the strength of the bonding. 2. temporary: Apply a thin, even coat to the part that is desired to remain removable and wait for at least 20 min. Afterwards the part is self-adhesive and can be fixed and removed several times.

Advice

After spraying, hold the can upside down and press the aerosol until only propellant and no more glue comes out. This prevents the aerosol from clogging.

Points of attention

Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50 ?C. Do not pierce or burn, even after use. Throw away only when completely empty. Do not breathe vapour. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition ? Do not smoke. Without adequate ventilation accumulation of potentially explosive alloys possible. Keep out of reach of children.

AFTER USE:
Stains/residue

For cleaning smudgy parts and equipment as well as for removing stains use cleaning spirit (test fisrt). Cured adhesive stains are hard to remove.

Storage conditions

Store in a dry, cool and frost free place.

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “Bison Adhesive Spray for Foil Panni 500ml (Leafing Glue)”

Your email address will not be published. Required fields are marked *