Epoxy Resin Art Imported Crystal Clear Kit | 1500ml Set - 1000ml Resin + 500ml Hardener | 750ml Set (500ml Resin + 250ml Hardener) | 375ml Set (250ml Resin + 125ml Hardener) Ratio 2:1

Leader Crystal Clear Epoxy Resin Kit – 2:1 Ratio Resin & Hardener

Create professional-quality resin art at home with this crystal clear epoxy resin kit. It comes as a two-part system, Resin (Part A) and Hardener (Part B), mixed in an easy 2:1 ratio by volume. Once cured, it gives a hard, glossy, glass-like finish.

🎁 SPECIAL OFFER
FREE Gold Foil Flakes 5g with the 1500ml Kit only.
Not included with the 375ml and 750ml kits.

📏 CHOOSE YOUR SIZE

✨ WHY CHOOSE THIS RESIN
✔ Crystal Clear Finish – Hard, glossy, glass-like finish once cured
✔ Easy 2:1 Ratio – Resin (Part A) and Hardener (Part B), mixed by volume
✔ Self-Leveling – Releases bubbles easily, so you get a smooth, clear surface
✔ For All Levels – Works well for both beginners and experienced artists
✔ Fully Customizable – Add resin pigments, mica powder, alcohol ink, glitter, dried flowers or photos to create your own designs

🎨 PERFECT FOR

• Resin coasters
• Serving trays
• Keychains
• Jewelry
• Name plates
• Bookmarks
• Ocean art
• Geode art
• Wall clocks
• Small wood projects

The 1500ml kit is suitable for larger work such as wood coating, table top coating and thin river table layers.

📝 HOW TO USE

1. Prepare your workspace
Work on a flat, level, dust-free surface. Cover it with a plastic sheet or wax paper. Ideal room temperature is 20–30°C.

2. Measure accurately
Pour 2 parts Resin (A) and 1 part Hardener (B) by volume into a clean measuring cup.
Example: 100ml Resin + 50ml Hardener.
⚠️ Wrong ratio causes sticky or soft resin.

3. Mix slowly
Stir gently for 3–5 minutes, scraping the sides and bottom of the cup. Mix slowly to avoid trapping air bubbles.

4. Add colors (optional)
Add pigment, mica powder or alcohol ink and mix well.

5. Pour
Pour into silicone molds or onto your surface. For thick pieces, pour in thin layers and let each layer set before pouring the next.

6. Remove bubbles
Pass a heat gun or torch lightly over the surface. Do not hold it in one spot.

7. Cover and cure
Cover to protect from dust and leave undisturbed.

⏱️ CURING TIMES

💡 Tip: In humid weather, curing may take longer and the surface can turn cloudy. Work in a dry room or AC room if possible.

⚠️ PRECAUTIONS

Safety

• Always wear nitrile gloves. Avoid direct contact with skin and eyes.
• Work in a well-ventilated area. Do not inhale fumes for long periods.
• If resin touches skin, wipe it off and wash with soap and water. Do not use thinner or acetone on skin.
• If it gets into eyes, rinse with clean water for 15 minutes and consult a doctor.
• Keep out of reach of children and pets.
• Not for internal use. Not food safe – do not use for surfaces in direct contact with food or drink.

Working

• Do not pour too thick in a single layer. It can overheat, crack or turn yellow.
• Mix only as much as you can use within the working time.

Storage

• Store in a cool, dry place away from direct sunlight. Close lids tightly after use.
• Hardener may thicken or crystallize in cold weather. Warm the closed bottle in warm water before use.

📦 WHAT’S IN THE BOX

• 375ml Kit: 1 × Resin A 250ml + 1 × Hardener B 125ml
• 750ml Kit: 1 × Resin A 500ml + 1 × Hardener B 250ml
• 1500ml Kit: 1 × Resin A 1000ml + 1 × Hardener B 500ml + FREE Gold Foil Flakes 5g