High Quality Wooden Frame Finished Hoop for Embroidery and Decorations (Available in Multiple Sizes 4inch - 20inch)

Wooden Embroidery Hoop – Made in Pakistan

KEY FEATURES
✔ Made in Pakistan with high quality wood and material
✔ Embroidery hoops have an adjustment screw that you can tighten when necessary to keep the fabric as tight as a drum
✔ Sizes mentioned are the outer diameter of the hoop

USES
Not only for embroidery, you can also make the decorations on the walls:

• Needlecraft
• Cross-stitch
• Hand embroidery (ribbon lace, crewel)
• Embroidery Christmas ornament
• Quilting
• Wall decorations

⚠️ BEFORE FIRST USE

1. Make sure to apply oil on the screw the first time when using.
2. Open and close the screw 3 to 4 times after oiling.
3. Wipe the area with a clean cloth and leave it for 3–4 hours.
4. Then thoroughly wipe it again and then use it.

Clean it properly before using to avoid any oil on the fabric.

HOW TO USE

1. Loosen the outer screws, flatten the inner hoop, place the cloth on the hoop, and place the outer hoop on the inner hoop.
2. Flat the cloth and tighten the screw.
3. Continue to flat the cloth, to ensure that no pleats, and pay attention to the fabric so that the warp and the vertical and horizontal edge, and finally tighten the screws.
4. Inspect the hoop whether it is tight enough. The way to check the tightness is to use a needle with thread going through the fabric surface. It is workable if there is a loudly sound when pulling the thread.